Motors and Gearboxes » Pololu Metal Gearmotors » Micro Metal Gearmotors »
6V Medium-Power (MP) Micro Metal Gearmotors
These micro metal gearmotors have medium-power (MP), 6 V motors with a stall current of 670 mA and a typical free-run current of 40 mA. The following table shows all of the versions available with the MP 6V motor:
| Rated Voltage |
Motor Type |
Stall Current |
No-Load Current |
No-Load Speed (RPM) |
Extrapolated Stall Torque |
Max Power (W) |
 Single-Shaft (Gearbox Only) |
 Dual-Shaft (Gearbox & Motor) |
|
|---|---|---|---|---|---|---|---|---|---|
| (kg ⋅ cm) | (oz ⋅ in) | ||||||||
| 6 V | medium-power (MP) |
0.67 A | 80 mA | 4400 | 0.06 | 0.8 | – | 5:1 MP 6V | 5:1 MP 6V dual-shaft |
| 70 mA | 2200 | 0.11 | 1.5 | – | 10:1 MP 6V | 10:1 MP 6V dual-shaft | |||
| 1400 | 0.20 | 2.8 | 0.70 | 15:1 MP 6V | 15:1 MP 6V dual-shaft | ||||
| 720 | 0.33 | 4.6 | 0.57 | 30:1 MP 6V | 30:1 MP 6V dual-shaft | ||||
| 420 | 0.54 | 7.5 | 0.55 | 50:1 MP 6V | 50:1 MP 6V dual-shaft | ||||
| 290 | 0.78 | 11 | 0.54 | 75:1 MP 6V | 75:1 MP 6V dual-shaft | ||||
| 220 | 0.94 | 13 | 0.50 | 100:1 MP 6V | 100:1 MP 6V dual-shaft | ||||
| 150 | 1.3 | 18 | 0.48 | 150:1 MP 6V | 150:1 MP 6V dual-shaft | ||||
| 100 | 1.7 | 24 | 0.46 | 210:1 MP 6V | 210:1 MP 6V dual-shaft | ||||
| 88 | 2.2 | 31 | 0.48 | 250:1 MP 6V | 250:1 MP 6V dual-shaft | ||||
| 73 | 2.4 | 33 | 0.44 | 298:1 MP 6V | 298:1 MP 6V dual-shaft | ||||
| 57 | 3.6 | 50 | 0.53 | 380:1 MP 6V | 380:1 MP 6V dual-shaft | ||||
| 22 | 6.7 | 93 | – | 1000:1 MP 6V | 1000:1 MP 6V dual-shaft | ||||
Note: Stalling or overloading gearmotors can greatly decrease their lifetimes and even result in immediate damage. The recommended upper limit for instantaneous torque is 2.5 kg-cm (35 oz-in) for the 380:1 and 1000:1 gearboxes, and 2 kg-cm (25 oz-in) for all the other gear ratios; we strongly advise keeping applied loads well under this limit. Stalls can also result in rapid (potentially on the order of seconds) thermal damage to the motor windings and brushes, especially for the versions that use high-power (HP and HPCB) motors; a general recommendation for brushed DC motor operation is 25% or less of the stall current.
Versions with other motors are also available. You can use the following selection boxes to choose from all of our micro metal gearmotor versions:
Alternatives available with variations in these parameter(s): gear ratio motor type extended motor shaft? Select variant…
Compare all products in this category
Products in category “6V Medium-Power (MP) Micro Metal Gearmotors”
| Pololu item #: 2362 | |
| Brand: Pololu | supply outlook |
| Status: Active and Preferred | |
|
|
This gearmotor is a miniature medium-power, 6 V brushed DC motor with a 4.995:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter.
Key specifications:
| voltage | no-load performance | stall extrapolation |
|---|---|---|
| 6 V | 4400 RPM, 80 mA | 0.06 kg⋅cm (0.8 oz⋅in), 0.67 A |
| Pololu item #: 2376 | |
| Brand: Pololu | supply outlook |
| Status: Active and Preferred | |
|
|
|
This gearmotor is a miniature medium-power, 6 V brushed DC motor with a 4.995:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. This version also has a 4.5 × 1 mm extended motor shaft.
Key specifications:
| voltage | no-load performance | stall extrapolation |
|---|---|---|
| 6 V | 4400 RPM, 80 mA | 0.18 kg⋅cm (0.8 oz⋅in), 0.67 A |
| Pololu item #: 2363 | |
| Brand: Pololu | supply outlook |
| Status: Active and Preferred | |
|
|
|
This gearmotor is a miniature medium-power, 6 V brushed DC motor with a 9.96:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter.
Key specifications:
| voltage | no-load performance | stall extrapolation |
|---|---|---|
| 6 V | 2200 RPM, 70 mA | 0.11 kg⋅cm (1.5 oz⋅in), 0.67 A |
| Pololu item #: 2377 | |
| Brand: Pololu | supply outlook |
| Status: Active and Preferred | |
|
|
|
This gearmotor is a miniature medium-power, 6 V brushed DC motor with a 9.96:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. This version also has a 4.5 × 1 mm extended motor shaft.
Key specifications:
| voltage | no-load performance | stall extrapolation |
|---|---|---|
| 6 V | 2200 RPM, 70 mA | 0.11 kg⋅cm (1.5 oz⋅in), 0.67 A |
| Pololu item #: 4782 | |
| Brand: Pololu | supply outlook |
| Status: Active and Preferred | |
|
|
|
This gearmotor is a miniature medium-power, 6 V brushed DC motor with a 15.25:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter.
Key specifications:
| voltage | no-load performance | stall extrapolation |
|---|---|---|
| 6 V | 1400 RPM, 70 mA | 0.20 kg⋅cm (2.8 oz⋅in), 0.67 A |
| Pololu item #: 4783 | |
| Brand: Pololu | supply outlook |
| Status: Active and Preferred | |
|
|
|
This gearmotor is a miniature medium-power, 6 V brushed DC motor with a 15.25:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. This version also has a 4.5 × 1 mm extended motor shaft.
Key specifications:
| voltage | no-load performance | stall extrapolation |
|---|---|---|
| 6 V | 1400 RPM, 70 mA | 0.20 kg⋅cm (2.8 oz⋅in), 0.67 A |
| Pololu item #: 2364 | |
| Brand: Pololu | supply outlook |
| Status: Active and Preferred | |
|
|
|
This gearmotor is a miniature medium-power, 6 V brushed DC motor with a 29.86:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter.
Key specifications:
| voltage | no-load performance | stall extrapolation |
|---|---|---|
| 6 V | 720 RPM, 70 mA | 0.33 kg⋅cm (4.6 oz⋅in), 0.67 A |
| Pololu item #: 2378 | |
| Brand: Pololu | supply outlook |
| Status: Active and Preferred | |
|
|
|
This gearmotor is a miniature medium-power, 6 V brushed DC motor with a 29.86:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. This version also has a 4.5 × 1 mm extended motor shaft.
Key specifications:
| voltage | no-load performance | stall extrapolation |
|---|---|---|
| 6 V | 720 RPM, 70 mA | 0.33 kg⋅cm (4.6 oz⋅in), 0.67 A |
| Pololu item #: 2365 | |
| Brand: Pololu | supply outlook |
| Status: Active and Preferred | |
|
|
|
This gearmotor is a miniature medium-power, 6 V brushed DC motor with a 51.45:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter.
Key specifications:
| voltage | no-load performance | stall extrapolation |
|---|---|---|
| 6 V | 420 RPM, 70 mA | 0.54 kg⋅cm (7.5 oz⋅in), 0.67 A |
| Pololu item #: 2379 | |
| Brand: Pololu | supply outlook |
| Status: Active and Preferred | |
|
|
|
This gearmotor is a miniature medium-power, 6 V brushed DC motor with a 51.45:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. This version also has a 4.5 × 1 mm extended motor shaft.
Key specifications:
| voltage | no-load performance | stall extrapolation |
|---|---|---|
| 6 V | 420 RPM, 70 mA | 0.54 kg⋅cm (7.5 oz⋅in), 0.67 A |
| Pololu item #: 2366 | |
| Brand: Pololu | supply outlook |
| Status: Active and Preferred | |
|
|
|
This gearmotor is a miniature medium-power, 6 V brushed DC motor with a 75.81:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter.
Key specifications:
| voltage | no-load performance | stall extrapolation |
|---|---|---|
| 6 V | 290 RPM, 70 mA | 0.78 kg⋅cm (11 oz⋅in), 0.67 A |
| Pololu item #: 2380 | |
| Brand: Pololu | supply outlook |
| Status: Active and Preferred | |
|
|
|
This gearmotor is a miniature medium-power, 6 V brushed DC motor with a 75.81:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. This version also has a 4.5 × 1 mm extended motor shaft.
Key specifications:
| voltage | no-load performance | stall extrapolation |
|---|---|---|
| 6 V | 290 RPM, 70 mA | 0.78 kg⋅cm (11 oz⋅in), 0.67 A |
| Pololu item #: 2367 | |
| Brand: Pololu | supply outlook |
| Status: Active and Preferred | |
|
|
|
This gearmotor is a miniature medium-power, 6 V brushed DC motor with a 100.37:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter.
Key specifications:
| voltage | no-load performance | stall extrapolation |
|---|---|---|
| 6 V | 220 RPM, 70 mA | 0.94 kg⋅cm (13 oz⋅in), 0.67 A |
| Pololu item #: 2381 | |
| Brand: Pololu | supply outlook |
| Status: Active and Preferred | |
|
|
|
This gearmotor is a miniature medium-power, 6 V brushed DC motor with a 100.37:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. This version also has a 4.5 × 1 mm extended motor shaft.
Key specifications:
| voltage | no-load performance | stall extrapolation |
|---|---|---|
| 6 V | 220 RPM, 70 mA | 0.94 kg⋅cm (13 oz⋅in), 0.67 A |
| Pololu item #: 2368 | |
| Brand: Pololu | supply outlook |
| Status: Active and Preferred | |
|
|
|
This gearmotor is a miniature medium-power, 6 V brushed DC motor with a 150.58:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter.
Key specifications:
| voltage | no-load performance | stall extrapolation |
|---|---|---|
| 6 V | 150 RPM, 70 mA | 1.3 kg⋅cm (18 oz⋅in), 0.67 A |
| Pololu item #: 2382 | |
| Brand: Pololu | supply outlook |
| Status: Active and Preferred | |
|
|
|
This gearmotor is a miniature medium-power, 6 V brushed DC motor with a 150.58:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. This version also has a 4.5 × 1 mm extended motor shaft.
Key specifications:
| voltage | no-load performance | stall extrapolation |
|---|---|---|
| 6 V | 150 RPM, 70 mA | 1.3 kg⋅cm (18 oz⋅in), 0.67 A |
| Pololu item #: 2369 | |
| Brand: Pololu | supply outlook |
| Status: Active and Preferred | |
|
|
|
This gearmotor is a miniature medium-power, 6 V brushed DC motor with a 210.59:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter.
Key specifications:
| voltage | no-load performance | stall extrapolation |
|---|---|---|
| 6 V | 100 RPM, 70 mA | 1.7 kg⋅cm (24 oz⋅in), 0.67 A |
| Pololu item #: 2383 | |
| Brand: Pololu | supply outlook |
| Status: Active and Preferred | |
|
|
|
This gearmotor is a miniature medium-power, 6 V brushed DC motor with a 210.59:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. This version also has a 4.5 × 1 mm extended motor shaft.
Key specifications:
| voltage | no-load performance | stall extrapolation |
|---|---|---|
| 6 V | 100 RPM, 70 mA | 1.7 kg⋅cm (24 oz⋅in), 0.67 A |
| Pololu item #: 2370 | |
| Brand: Pololu | supply outlook |
| Status: Active and Preferred | |
|
|
|
This gearmotor is a miniature medium-power, 6 V brushed DC motor with a 248.98:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter.
Key specifications:
| voltage | no-load performance | stall extrapolation |
|---|---|---|
| 6 V | 88 RPM, 70 mA | 2.2 kg⋅cm (31 oz⋅in), 0.67 A |
| Pololu item #: 2384 | |
| Brand: Pololu | supply outlook |
| Status: Active and Preferred | |
|
|
|
This gearmotor is a miniature medium-power, 6 V brushed DC motor with a 248.98:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. This version also has a 4.5 × 1 mm extended motor shaft.
Key specifications:
| voltage | no-load performance | stall extrapolation |
|---|---|---|
| 6 V | 88 RPM, 70 mA | 2.2 kg⋅cm (31 oz⋅in), 0.67 A |
| Pololu item #: 2371 | |
| Brand: Pololu | supply outlook |
| Status: Active and Preferred | |
|
|
|
This gearmotor is a miniature medium-power, 6 V brushed DC motor with a 297.92:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter.
Key specifications:
| voltage | no-load performance | stall extrapolation |
|---|---|---|
| 6 V | 73 RPM, 70 mA | 2.4 kg⋅cm (33 oz⋅in), 0.67 A |
| Pololu item #: 2385 | |
| Brand: Pololu | supply outlook |
| Status: Active and Preferred | |
|
|
|
This gearmotor is a miniature medium-power, 6 V brushed DC motor with a 297.92:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. This version also has a 4.5 × 1 mm extended motor shaft.
Key specifications:
| voltage | no-load performance | stall extrapolation |
|---|---|---|
| 6 V | 73 RPM, 70 mA | 2.4 kg⋅cm (33 oz⋅in), 0.67 A |
| Pololu item #: 4792 | |
| Brand: Pololu | supply outlook |
| Status: Active and Preferred | |
|
|
|
This gearmotor is a miniature medium-power, 6 V brushed DC motor with a 379.17:1 metal gearbox. This version has stainless steel gearbox plates instead of the standard brass ones for increased durability and resistance to wear from radial loads. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter.
Key specifications:
| voltage | no-load performance | stall extrapolation |
|---|---|---|
| 6 V | 57 RPM, 70 mA | 3.6 kg⋅cm (50 oz⋅in), 0.67 A |
| Pololu item #: 4793 | |
| Brand: Pololu | supply outlook |
| Status: Active and Preferred | |
|
|
|
This gearmotor is a miniature medium-power, 6 V brushed DC motor with a 379.17:1 metal gearbox. This version has stainless steel gearbox plates instead of the standard brass ones for increased durability and resistance to wear from radial loads. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. This version also has a 4.5 × 1 mm extended motor shaft.
Key specifications:
| voltage | no-load performance | stall extrapolation |
|---|---|---|
| 6 V | 57 RPM, 70 mA | 3.6 kg⋅cm (50 oz⋅in), 0.67 A |
| Pololu item #: 2372 | |
| Brand: Pololu | supply outlook |
| Status: Active and Preferred | |
|
|
|
This gearmotor is a miniature medium-power, 6 V brushed DC motor with a 986.41:1 metal gearbox, making it a great choice for applications requiring fine control at very low speeds. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. (Note: stall torque and current specifications are theoretical values; stalling the motor will damage the gearbox.)
Key specifications:
| voltage | no-load performance | stall extrapolation |
|---|---|---|
| 6 V | 22 RPM, 70 mA | 6.7 kg⋅cm (93 oz⋅in), 0.67 A |
| Pololu item #: 3059 | |
| Brand: Pololu | supply outlook |
| Status: Active and Preferred | |
|
|
|
This gearmotor is a miniature medium-power, 6 V brushed DC motor with a 986.41:1 metal gearbox, making it a great choice for applications requiring fine control at very low speeds. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. This version also has a 4.5 × 1 mm extended motor shaft. (Note: stall torque and current specifications are theoretical values; stalling the motor will damage the gearbox.)
Key specifications:
| voltage | no-load performance | stall extrapolation |
|---|---|---|
| 6 V | 22 RPM, 70 mA | 6.7 kg⋅cm (93 oz⋅in), 0.67 A |
Related products
Related categories
Home | Forum | Blog | Support | Ordering Information | Wish Lists | Distributors | BIG Order Form | About | Contact
© 2001–2023 Pololu Corporation
