Motors and Gearboxes » Pololu Metal Gearmotors » Micro Metal Gearmotors »
6V Low-Power (LP) Micro Metal Gearmotors
These micro metal gearmotors have low-power (LP), 6 V motors with a stall current of 360 mA and a typical free-run current of 20 mA. The following table shows all of the versions available with the LP 6V motor:
Rated Voltage |
Motor Type |
Stall Current |
No-Load Current |
No-Load Speed (RPM) |
Extrapolated Stall Torque |
Max Power (W) |
![]() Single-Shaft (Gearbox Only) |
![]() Dual-Shaft (Gearbox & Motor) |
|
---|---|---|---|---|---|---|---|---|---|
(kg ⋅ cm) | (oz ⋅ in) | ||||||||
6 V | low-power (LP) |
0.36 A | 50 mA | 2500 | 0.05 | 0.7 | – | 5:1 LP 6V | 5:1 LP 6V dual-shaft |
40 mA | 1300 | 0.10 | 1.4 | – | 10:1 LP 6V | 10:1 LP 6V dual-shaft | |||
860 | 0.17 | 2.4 | 0.37 | 15:1 LP 6V | 15:1 LP 6V dual-shaft | ||||
450 | 0.29 | 4.0 | 0.31 | 30:1 LP 6V | 30:1 LP 6V dual-shaft | ||||
270 | 0.44 | 6.1 | 0.29 | 50:1 LP 6V | 50:1 LP 6V dual-shaft | ||||
180 | 0.64 | 8.9 | 0.29 | 75:1 LP 6V | 75:1 LP 6V dual-shaft | ||||
130 | 0.74 | 10 | 0.25 | 100:1 LP 6V | 100:1 LP 6V dual-shaft | ||||
90 | 1.1 | 15 | 0.25 | 150:1 LP 6V | 150:1 LP 6V dual-shaft | ||||
65 | 1.6 | 22 | 0.25 | 210:1 LP 6V | 210:1 LP 6V dual-shaft | ||||
54 | 1.7 | 24 | 0.23 | 250:1 LP 6V | 250:1 LP 6V dual-shaft | ||||
45 | 2.0 | 28 | 0.22 | 298:1 LP 6V | 298:1 LP 6V dual-shaft | ||||
36 | 2.9 | 40 | 0.27 | 380:1 LP 6V | 380:1 LP 6V dual-shaft | ||||
13 | 5.5 | 76 | – | 1000:1 LP 6V | 1000:1 LP 6V dual-shaft |
Note: Stalling or overloading gearmotors can greatly decrease their lifetimes and even result in immediate damage. The recommended upper limit for instantaneous torque is 2.5 kg-cm (35 oz-in) for the 380:1 and 1000:1 gearboxes, and 2 kg-cm (25 oz-in) for all the other gear ratios; we strongly advise keeping applied loads well under this limit. Stalls can also result in rapid (potentially on the order of seconds) thermal damage to the motor windings and brushes, especially for the versions that use high-power (HP and HPCB) motors; a general recommendation for brushed DC motor operation is 25% or less of the stall current.
Versions with other motors are also available. You can use the following selection boxes to choose from all of our micro metal gearmotor versions:
Alternatives available with variations in these parameter(s): gear ratio motor type extended motor shaft? Select variant…
Compare all products in this category
Products in category “6V Low-Power (LP) Micro Metal Gearmotors”
Pololu item #: 1100 | |
Brand: Pololu | supply outlook |
Status: Active and Preferred | |
![]() |
This gearmotor is a miniature low-power, 6 V brushed DC motor with a 4.995:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter.
Key specifications:
voltage | no-load performance | stall extrapolation |
---|---|---|
6 V | 2500 RPM, 50 mA | 0.05 kg⋅cm (0.7 oz⋅in), 0.36 A |
Pololu item #: 2200 | |
Brand: Pololu | supply outlook |
Status: Active and Preferred | |
![]() |
This gearmotor is a miniature low-power, 6 V brushed DC motor with a 4.995:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. This version also has a 4.5 × 1 mm extended motor shaft.
Key specifications:
voltage | no-load performance | stall extrapolation |
---|---|---|
6 V | 2500 RPM, 50 mA | 0.05 kg⋅cm (0.7 oz⋅in), 0.36 A |
Pololu item #: 1099 | |
Brand: Pololu | supply outlook |
Status: Active and Preferred | |
![]() |
This gearmotor is a miniature low-power, 6 V brushed DC motor with a 9.96:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter.
Key specifications:
voltage | no-load performance | stall extrapolation |
---|---|---|
6 V | 1300 RPM, 40 mA | 0.10 kg⋅cm (1.4 oz⋅in), 0.36 A |
Pololu item #: 2201 | |
Brand: Pololu | supply outlook |
Status: Active and Preferred | |
![]() |
This gearmotor is a miniature low-power, 6 V brushed DC motor with a 9.96:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. This version also has a 4.5 × 1 mm extended motor shaft.
Key specifications:
voltage | no-load performance | stall extrapolation |
---|---|---|
6 V | 1300 RPM, 40 mA | 0.10 kg⋅cm (1.4 oz⋅in), 0.36 A |
Pololu item #: 4780 | |
Brand: Pololu | supply outlook |
Status: Active and Preferred | |
![]() |
This gearmotor is a miniature low-power, 6 V brushed DC motor with a 15.25:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter.
Key specifications:
voltage | no-load performance | stall extrapolation |
---|---|---|
6 V | 860 RPM, 40 mA | 0.17 kg⋅cm (2.4 oz⋅in), 0.36 A |
Pololu item #: 4781 | |
Brand: Pololu | supply outlook |
Status: Active and Preferred | |
![]() |
This gearmotor is a miniature low-power, 6 V brushed DC motor with a 15.25:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. This version also has a 4.5 × 1 mm extended motor shaft.
Key specifications:
voltage | no-load performance | stall extrapolation |
---|---|---|
6 V | 860 RPM, 40 mA | 0.17 kg⋅cm (2.4 oz⋅in), 0.36 A |
Pololu item #: 993 | |
Brand: Pololu | supply outlook |
Status: Active and Preferred | |
![]() |
This gearmotor is a miniature low-power, 6 V brushed DC motor with a 29.86:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter.
Key specifications:
voltage | no-load performance | stall extrapolation |
---|---|---|
6 V | 450 RPM, 40 mA | 0.29 kg⋅cm (4.0 oz⋅in), 0.36 A |
Pololu item #: 2202 | |
Brand: Pololu | supply outlook |
Status: Active and Preferred | |
![]() |
This gearmotor is a miniature low-power, 6 V brushed DC motor with a 29.86:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. This version also has a 4.5 × 1 mm extended motor shaft.
Key specifications:
voltage | no-load performance | stall extrapolation |
---|---|---|
6 V | 450 RPM, 40 mA | 0.29 kg⋅cm (4.0 oz⋅in), 0.36 A |
Pololu item #: 1098 | |
Brand: Pololu | supply outlook |
Status: Active and Preferred | |
![]() |
This gearmotor is a miniature low-power, 6 V brushed DC motor with a 51.45:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter.
Key specifications:
voltage | no-load performance | stall extrapolation |
---|---|---|
6 V | 270 RPM, 40 mA | 0.44 kg⋅cm (6.1 oz⋅in), 0.36 A |
Pololu item #: 2203 | |
Brand: Pololu | supply outlook |
Status: Active and Preferred | |
![]() |
This gearmotor is a miniature low-power, 6 V brushed DC motor with a 51.45:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. This version also has a 4.5 × 1 mm extended motor shaft.
Key specifications:
voltage | no-load performance | stall extrapolation |
---|---|---|
6 V | 270 RPM, 40 mA | 0.44 kg⋅cm (6.1 oz⋅in), 0.36 A |
Pololu item #: 2360 | |
Brand: Pololu | supply outlook |
Status: Active and Preferred | |
![]() |
This gearmotor is a miniature low-power, 6 V brushed DC motor with a 75.81:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter.
Key specifications:
voltage | no-load performance | stall extrapolation |
---|---|---|
6 V | 180 RPM, 40 mA | 0.64 kg⋅cm (8.9 oz⋅in), 0.36 A |
Pololu item #: 2209 | |
Brand: Pololu | supply outlook |
Status: Active and Preferred | |
![]() |
This gearmotor is a miniature low-power, 6 V brushed DC motor with a 75.81:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. This version also has a 4.5 × 1 mm extended motor shaft.
Key specifications:
voltage | no-load performance | stall extrapolation |
---|---|---|
6 V | 180 RPM, 40 mA | 0.64 kg⋅cm (8.9 oz⋅in), 0.36 A |
Pololu item #: 992 | |
Brand: Pololu | supply outlook |
Status: Active and Preferred | |
![]() |
This gearmotor is a miniature low-power, 6 V brushed DC motor with a 100.37:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter.
Key specifications:
voltage | no-load performance | stall extrapolation |
---|---|---|
6 V | 130 RPM, 40 mA | 0.74 kg⋅cm (10 oz⋅in), 0.36 A |
Pololu item #: 2204 | |
Brand: Pololu | supply outlook |
Status: Active and Preferred | |
![]() |
This gearmotor is a miniature low-power, 6 V brushed DC motor with a 100.37:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. This version also has a 4.5 × 1 mm extended motor shaft.
Key specifications:
voltage | no-load performance | stall extrapolation |
---|---|---|
6 V | 130 RPM, 40 mA | 0.74 kg⋅cm (10 oz⋅in), 0.36 A |
Pololu item #: 1097 | |
Brand: Pololu | supply outlook |
Status: Active and Preferred | |
![]() |
This gearmotor is a miniature low-power, 6 V brushed DC motor with a 150.58:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter.
Key specifications:
voltage | no-load performance | stall extrapolation |
---|---|---|
6 V | 90 RPM, 40 mA | 1.1 kg⋅cm (15 oz⋅in), 0.36 A |
Pololu item #: 2205 | |
Brand: Pololu | supply outlook |
Status: Active and Preferred | |
![]() |
This gearmotor is a miniature low-power, 6 V brushed DC motor with a 150.58:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. This version also has a 4.5 × 1 mm extended motor shaft.
Key specifications:
voltage | no-load performance | stall extrapolation |
---|---|---|
6 V | 90 RPM, 40 mA | 1.1 kg⋅cm (15 oz⋅in), 0.36 A |
Pololu item #: 1096 | |
Brand: Pololu | supply outlook |
Status: Active and Preferred | |
![]() |
This gearmotor is a miniature low-power, 6 V brushed DC motor with a 210.59:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter.
Key specifications:
voltage | no-load performance | stall extrapolation |
---|---|---|
6 V | 65 RPM, 40 mA | 1.6 kg⋅cm (22 oz⋅in), 0.36 A |
Pololu item #: 2206 | |
Brand: Pololu | supply outlook |
Status: Active and Preferred | |
![]() |
This gearmotor is a miniature low-power, 6 V brushed DC motor with a 210.59:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. This version also has a 4.5 × 1 mm extended motor shaft.
Key specifications:
voltage | no-load performance | stall extrapolation |
---|---|---|
6 V | 65 RPM, 40 mA | 1.6 kg⋅cm (22 oz⋅in), 0.36 A |
Pololu item #: 1095 | |
Brand: Pololu | supply outlook |
Status: Active and Preferred | |
![]() |
This gearmotor is a miniature low-power, 6 V brushed DC motor with a 248.98:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter.
Key specifications:
voltage | no-load performance | stall extrapolation |
---|---|---|
6 V | 54 RPM, 40 mA | 1.7 kg⋅cm (24 oz⋅in), 0.36 A |
Pololu item #: 2207 | |
Brand: Pololu | supply outlook |
Status: Active and Preferred | |
![]() |
This gearmotor is a miniature low-power, 6 V brushed DC motor with a 248.98:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. This version also has a 4.5 × 1 mm extended motor shaft.
Key specifications:
voltage | no-load performance | stall extrapolation |
---|---|---|
6 V | 54 RPM, 40 mA | 1.7 kg⋅cm (24 oz⋅in), 0.36 A |
Pololu item #: 1094 | |
Brand: Pololu | supply outlook |
Status: Active and Preferred | |
![]() |
This gearmotor is a miniature low-power, 6 V brushed DC motor with a 297.92:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter.
Key specifications:
voltage | no-load performance | stall extrapolation |
---|---|---|
6 V | 45 RPM, 40 mA | 2.0 kg⋅cm (28 oz⋅in), 0.36 A |
Pololu item #: 2208 | |
Brand: Pololu | supply outlook |
Status: Active and Preferred | |
![]() |
This gearmotor is a miniature low-power, 6 V brushed DC motor with a 297.92:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. This version also has a 4.5 × 1 mm extended motor shaft.
Key specifications:
voltage | no-load performance | stall extrapolation |
---|---|---|
6 V | 45 RPM, 40 mA | 2.0 kg⋅cm (28 oz⋅in), 0.36 A |
Pololu item #: 4790 | |
Brand: Pololu | supply outlook |
Status: Active and Preferred | |
![]() |
This gearmotor is a miniature low-power, 6 V brushed DC motor with a 379.17:1 metal gearbox. This version has stainless steel gearbox plates instead of the standard brass ones for increased durability and resistance to wear from radial loads. The gearmotor has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter.
Key specifications:
voltage | no-load performance | stall extrapolation |
---|---|---|
6 V | 36 RPM, 40 mA | 2.9 kg⋅cm (40 oz⋅in), 0.36 A |
Pololu item #: 4791 | |
Brand: Pololu | supply outlook |
Status: Active and Preferred | |
![]() |
This gearmotor is a miniature low-power, 6 V brushed DC motor with a 379.17:1 metal gearbox. This version has stainless steel gearbox plates instead of the standard brass ones for increased durability and resistance to wear from radial loads. The gearmotor has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. This version also has a 4.5 × 1 mm extended motor shaft.
Key specifications:
voltage | no-load performance | stall extrapolation |
---|---|---|
6 V | 36 RPM, 40 mA | 2.9 kg⋅cm (40 oz⋅in), 0.36 A |
Pololu item #: 1596 | |
Brand: Pololu | supply outlook |
Status: Active and Preferred | |
![]() |
This gearmotor is a miniature low-power, 6 V brushed DC motor with a 986.41:1 metal gearbox, making it a great choice for applications requiring fine control at very low speeds. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. (Note: stall torque and current specifications are theoretical values; stalling the motor will damage the gearbox.)
Key specifications:
voltage | no-load performance | stall extrapolation |
---|---|---|
6 V | 13 RPM, 40 mA | 5.5 kg⋅cm (76 oz⋅in), 0.36 A |
Pololu item #: 3058 | |
Brand: Pololu | supply outlook |
Status: Active and Preferred | |
![]() |
This gearmotor is a miniature low-power, 6 V brushed DC motor with a 986.41:1 metal gearbox, making it a great choice for applications requiring fine control at very low speeds. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. This version also has a 4.5 × 1 mm extended motor shaft. (Note: stall torque and current specifications are theoretical values; stalling the motor will damage the gearbox.)
Key specifications:
voltage | no-load performance | stall extrapolation |
---|---|---|
6 V | 13 RPM, 40 mA | 5.5 kg⋅cm (76 oz⋅in), 0.36 A |