Pololu Metal Gearmotors » Micro Metal Gearmotors » 12V High-Power Carbon Brush (HPCB) Micro Metal Gearmotors »
1000:1 Micro Metal Gearmotor HPCB 12V with Extended Motor Shaft
This gearmotor is a miniature high-power, 12 V brushed DC motor with long-life carbon brushes and a 986.41:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. This version also has a 4.5 × 1 mm extended motor shaft. (Note: stall torque and current specifications are theoretical values; stalling the motor will damage the gearbox.)
Key specifications:
| voltage | no-load performance | stall extrapolation |
|---|---|---|
| 12 V | 35 RPM, 80 mA | 10 kg⋅cm (140 oz⋅in), 0.75 A |
Alternatives available with variations in these parameter(s): gear ratio motor type extended motor shaft? Select variant…
Compare all products in 12V High-Power Carbon Brush (HPCB) Micro Metal Gearmotors or Micro Metal Gearmotors with Extended Motor Shafts.
| Description | Specs (20) | Pictures (18) | Resources (12) | FAQs (0) | On the blog (0) |
|---|
Dimensions
| Size: | 10 × 12 × 29.5 mm1 |
|---|---|
| Weight: | 10.5 g |
| Shaft diameter: | 3 mm2 |
General specifications
| Gear ratio: | 986.41:1 |
|---|---|
| No-load speed @ 12V: | 35 rpm3 |
| No-load current @ 12V: | 0.08 A4 |
| Stall current @ 12V: | 0.75 A5 |
| Stall torque @ 12V: | 10 kg·cm5 |
| No-load speed @ 6V: | 18 rpm6 |
| No-load current @ 6V: | 0.04 A6 |
| Stall current @ 6V: | 0.38 A7 |
| Stall torque @ 6V: | 5 kg·cm7 |
| Extended motor shaft?: | Y |
| Long-life carbon brushes?: | Y |
| Motor type: | 0.75A stall @ 12V (HPCB 12V - carbon brush) |
Performance at maximum efficiency
| Max efficiency @ 12V: | 25 % |
|---|---|
| Speed at max efficiency: | 27 rpm |
| Torque at max efficiency: | 2.1 kg·cm |
| Current at max efficiency: | 0.19 A |
| Output power at max efficiency: | 0.59 W |
Notes:
- 1
- Output shafts add 14 mm to the 29.5 mm length.
- 2
- D shaft.
- 3
- Typical; ±20%.
- 4
- Typical, ±50%; no-load current depends on internal friction, which is affected by many factors, including ambient temperature and duration of motor operation.
- 5
- This is a theoretical value; stalling the gearbox output shaft will damage the gearbox.
- 6
- This motor will run at 6 V but is intended for operation at 12 V.
- 7
- This is a theoretical value; stalling the gearbox output shaft will damage the gearbox. This motor will run at 6 V but is intended for operation at 12 V.
Related products
Related categories
Home | Forum | Blog | Support | Ordering Information | Wish Lists | Distributors | BIG Order Form | About | Contact
© 2001–2023 Pololu Corporation
