Development Boards (Programmable Controllers) » Raspberry Pi » Raspberry Pi Expansion Boards »
Pololu DRV8835 Dual Motor Driver Kit for Raspberry Pi
This compact expansion board plugs directly into the GPIO header on a Raspberry Pi B+, Pi A+, Pi 2, or Pi 3 and provides an easy and low-cost solution for driving a pair of small brushed DC motors. Its integrated DRV8835 dual motor driver allows it to operate from 1.5 V to 11 V, making it a great control option for low-voltage motors. The board can deliver a continuous 1.2 A (1.5 A peak) per motor, or a continuous 2.4 A (3 A peak) to a single motor when configured with both channels connected in parallel.
Compare all products in Raspberry Pi Expansion Boards or Brushed DC Motor Drivers.
| Description | Specs (11) | Pictures (10) | Resources (7) | FAQs (0) | On the blog (4) |
|---|
Dimensions
| Size: | 1.7″ × 0.65″1 |
|---|---|
| Weight: | 2.3 g1 |
General specifications
| Motor driver: | DRV8835 |
|---|---|
| Motor channels: | 2 |
| Minimum operating voltage: | 1.5 V2 |
| Maximum operating voltage: | 11 V |
| Continuous output current per channel: | 1.2 A3 |
| Peak output current per channel: | 1.5 A |
| Continuous paralleled output current: | 2.4 A3 |
| Maximum PWM frequency: | 250 kHz |
| Reverse voltage protection?: | Y |
Notes:
Related products
Home | Forum | Blog | Support | Ordering Information | Wish Lists | Distributors | BIG Order Form | About | Contact
© 2001–2023 Pololu Corporation
