Motion Control Modules » Stepper Motor Drivers » MP6500 Stepper Motor Driver Carriers »
MP6500 Stepper Motor Driver Carrier, Digital Current Control
This breakout board for the MPS MP6500 microstepping bipolar stepper motor driver has a pinout and interface that are very similar to that of our popular A4988 carriers, so it can be used as a drop-in replacement for those boards in many applications. The MP6500 offers up to 1/8-step microstepping, operates from 4.5 V to 35 V, and can deliver up to approximately 1.5 A per phase continuously without a heat sink or forced air flow. This version of the board allows for dynamic current limit control through a pair of digital inputs, and the board ships with 0.1″ male header pins included but not soldered in.
Alternatives available with variations in these parameter(s): current limit control header pins soldered? Select variant…
Compare all products in MP6500 Stepper Motor Driver Carriers or 16-pin Stepper Motor Drivers.
Description | Specs (14) | Pictures (10) | Resources (9) | FAQs (4) | On the blog (2) |
---|
MP6500 Stepper Motor Driver Carrier, Digital Current Control with included header pins. |
---|
MP6500 Stepper Motor Driver Carrier, Digital Current Control, |
---|
MP6500 Stepper Motor Driver Carrier, Digital Current Control, top view. |
---|
MP6500 Stepper Motor Driver Carrier, bottom view. |
---|
MP6500 Stepper Motor Driver Carriers, Digital Current Control with included header pins soldered. |
---|
Basic wiring diagram for connecting a microcontroller to an MP6500 Stepper Motor Driver Carrier, Digital Current Control (full-step mode). |
---|
Current limit vs. analog voltage for the MP6500 Stepper Motor Driver Carrier, Digital Current Control. |
---|
Current limit vs. PWM duty cycle for the MP6500 Stepper Motor Driver Carrier, Digital Current Control. |
---|
Schematic diagram for the MP6500 Stepper Motor Driver Carrier. |
---|
Schematic of nSLEEP and nFAULT pins on MP6500 carrier. |
---|