Pololu Metal Gearmotors » Micro Metal Gearmotors » 6V High-Power Carbon Brush (HPCB) Micro Metal Gearmotors »
298:1 Micro Metal Gearmotor HPCB 6V with Extended Motor Shaft
This gearmotor is a miniature high-power, 6 V brushed DC motor with long-life carbon brushes and a 297.92:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. This version also has a 4.5 × 1 mm extended motor shaft.
Key specifications:
| voltage | no-load performance | stall extrapolation |
|---|---|---|
| 6 V | 110 RPM, 150 mA | 3.4 kg⋅cm (47 oz⋅in), 1.5 A |
Alternatives available with variations in these parameter(s): gear ratio motor type extended motor shaft? Select variant…
Compare all products in 6V High-Power Carbon Brush (HPCB) Micro Metal Gearmotors or Micro Metal Gearmotors with Extended Motor Shafts.
| Description | Specs (17) | Pictures (18) | Resources (12) | FAQs (0) | On the blog (2) |
|---|
 |
Micro metal gearmotor HPCB with long-life carbon brushes (left) next to one with precious metal brushes. |
|---|
 |
Micro metal gearmotor HPCB long-life carbon brushes (left) next to micro metal gearmotor HP precious metal brushes (right). |
|---|
 |
Black Pololu Wheel 70×8mm on a Pololu Micro Metal Gearmotor. |
|---|
 |
Black Pololu Wheel 90×10mm on a Pololu Micro Metal Gearmotor. |
|---|
 |
Pololu Wheel 32×7mm on a Micro Metal Gearmotor. |
|---|
 |
Magnetic Encoder on a Micro Metal Gearmotor with Extended Motor Shaft, assembled with ribbon cable wires. |
|---|
 |
12mm Hex Wheel Adapter for 3mm Shaft on a Micro Metal Gearmotor. |
|---|
 |
Micro metal gearmotor mounted to a piece of acrylic with black mounting bracket version. |
|---|
 |
Micro metal gearmotor mounted to a piece of acrylic with black mounting bracket version. |
|---|
 |
Pololu micro metal gearmotor bracket extended with micro metal gearmotor. |
|---|
 |
Pololu micro metal gearmotor bracket extended with micro metal gearmotor. |
|---|
 |
Micro metal gearmotor with Pololu wheel 42×19mm and extended bracket. |
|---|
 |
Micro metal gearmotor and Pololu wheel 42×19mm mounted with extended mounting bracket. |
|---|
 |
Pololu 5" round robot chassis RRC04A with drive components and encoders mounted on top. |
|---|
 |
37D mm metal gearmotor next to a micro metal gearmotor for size comparison. |
|---|
 |
Dimensions of the Pololu micro metal gearmotors with precious metal brushes: low-power (LP), medium-power (MP), and high-power (HP). Units are mm over [inches]. |
|---|
 |
Dimensions of the Pololu micro metal gearmotors with carbon brushes (HPCB). Units are mm over [inches]. |
|---|
 |
An assortment of Pololu metal gearmotors. |
|---|
Related products
Related categories
Home | Forum | Blog | Support | Ordering Information | Wish Lists | Distributors | BIG Order Form | About | Contact
© 2001–2023 Pololu Corporation
