Pololu Metal Gearmotors » Micro Metal Gearmotors » Micro Metal Gearmotors with Extended Motor Shafts »
1000:1 Micro Metal Gearmotor HP 6V with Extended Motor Shaft
This gearmotor is a miniature high-power, 6 V brushed DC motor with a 986.41:1 metal gearbox, making it a great choice for applications requiring fine control at very low speeds. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. This version also has a 4.5 × 1 mm extended motor shaft. (Note: stall torque and current specifications are theoretical values; stalling the motor will damage the gearbox.)
Key specifications:
| voltage | no-load performance | stall extrapolation |
|---|---|---|
| 6 V | 31 RPM, 100 mA | 12 kg⋅cm (170 oz⋅in), 1.6 A |
Alternatives available with variations in these parameter(s): gear ratio motor type extended motor shaft? Select variant…
Compare all products in Micro Metal Gearmotors with Extended Motor Shafts or 6V High-Power (HP) Micro Metal Gearmotors.
| Description | Specs (15) | Pictures (18) | Resources (12) | FAQs (0) | On the blog (1) |
|---|
-
Open-source myoelectric hand prosthesis
- 18 May 2017Pololu customer Alvaro Villoslada made this impressive open-source 3D-printable hand prothesis. Each finger uses a 1000:1 Micro Metal Gearmotor HP...
Related products
Related categories
Home | Forum | Blog | Support | Ordering Information | Wish Lists | Distributors | BIG Order Form | About | Contact
© 2001–2023 Pololu Corporation
